FRSky FAAST compatible Receivers


FRSky FAAST compatible Receivers



FrSky TFR6-A 2.4ghz FASST Compatible Receiver

FrSky TFR6-A 2.4ghz FASST Compatible Receiver

This brand new receiver from FrSky is EXACTLY THE SAME specification as the extremely popular TFR6. But the difference? ...... This TFR6-A has end pins - which will make it even more popular!

Click on specification. This is a repeat of the TFR6 spec and is still all applicable.

The following is a repeat of the TFR6 spec and is all applicable:

1.Introduction

1.1 Compatibility:
FASST 2.4G: Air Systems (7CH Mode/Multi Mode)
FrSky TF Modules: TF-8M, TF-14M
1.2 Specifications:
Number of Channels: 7
Operating Voltage Range: 3.5V~10V
Dimension: 45 x 22 x 15mm
Weight: 7.8g
 
1.3 Features
1) Lighter weight and physically smaller;
2) Two selectable failsafe setting options.
2.Setup
2.1 Bind procedure:
Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and the receiver is operating normally.
2.2 Setting failsafe:
TFR6 support two selectable failsafe setting options, either use native failsafe position preset on the transmitter side, or set failsafe on TFR6.
2.2.1 Use native failsafe position preset on the transmitter side:
If not disabling failsafe on the transmitter side, TFR6 will use native failsafe position preset on the transmitter side.
2.2.2 Set failsafe on TFR6:
TFR6 supports failsafe function for all channels. Follow the steps below to set failsafe on TFR6:
1) Bind the receiver first, and disable failsafe on the transmitter side;
2) Set all transmitter controls to the desired failsafe position;
3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, indicating the failsafe is set up successfully.
If you do not need the failsafe function any more, just re-bind the receiver to set default failsafe mode.
Hint: If not disabling failsafe on the transmitter side, TFR6 will use native failsafe position preset on the transmitter side.
2.3 LED status:
RED LED GREEN LED Mode
Off On Normal mode
On On Waiting to be bound
Flashing On Signal lost
On Flashing twice Set failsafe
 

 FrSky TFR8S FASST Compatible 2.4ghz Receiver

FrSky TFR8S FASST Compatible 2.4ghz Receiver

FrSky TFR8S FASST Compatible 2.4ghz Receiver compatible with all Futaba FASST transmitter systems for air and ground R/C applications and can be doubled up with another TF receiver for expanding to 8 channels

Specification

Model: TFR8-S
Number of Channels: 8
Weight: 14.9g
Dimension: 54x30x15mm
Operating Voltage Range: 4.0V-10.0V
Operating Current: 100mA
Latency: 14ms (FS)
7ms (HS)
Features
1) Improve capability of anti-interference
2) Compatible with Futaba FASST 2.4GHz systems including ground systems (such as 3PK 4PK)
3) Parallel with TFR8/TFR8-S to become a 14 channel FASST compatible receiver
4) Firmware upgradable