Frsky SR Receivers


Frsky SR Receivers



Frsky S6R Giro Receiver LBT

Frsky S6R Receiver

 

Frsky S6R Receiver is Frskys first receiver from their new range. Its compatible with all Frsky's transmitters and modules but has additional functions, Gyro Accelerometre that can be programed via the Frsky STK cable and software or directly from the Horus X12

 

Number of Channel:6CH(1-6CH from conventional channel outputs)

Size: 47.42mm x 23.84mm x 14.7mm

With RSSI output on board:PWM voltage output(0~3.3V),100HZ,1500±500uS

Operating Voltage Range:4.0-10V

Operation Current:100mA@5V

Operating Range:full range

Gyro Measurement Range:±2000dps

Accelerometer Measurement Range:±4g

Firmware Upgradable

 

Compatibility:

Frsky DFT/DJT/DHT in D8_mode

Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D8 mode

Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode

S6R-EU only works with Frsky Taranis X9D Plus-EU/X9E-EU/Horus X12S-EU/XJT-EU in D16-EU mode

Features

Built-in a three-axis gyro and three-axis accelerometer sensor module
With RSSI PWM output (0~3.3V) on board
Built-in battery voltage sensor
Smart Port enable

Frsky S8R Receiver LBT

Frsky S8R Receiver

Frsky's has now released the S8R with the same functionality as the S6R

 

Specification:

Dimension: 46.47×26.78×14.12 mm (L×W×H)
Weight: 14g
Number of Channels: 8/16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS output)
With RSSI PWM output on board: PWM voltage output(0-3.3V), 100Hz, 1500±500us
Operating Current: 120mA@5V
Operating Voltage Range: 4.0-10V
Operating Range: full range
Gyroscope Measurement Range: ±2000dps
Accelerometer Measurement Range: ±4g
Firmware Upgradeable
Compatibility: FrSky Taranis X9D Plus/X9E/X7/Horus X12S/XJT in D16 mode
(PS: S8R-EU only works with FrSky Taranis X9D Plus/X9E/X7/Horus X12S/XJT in D16-EU mode)

 

Features:

Built-in 3-axis gyroscope and 3-axis accelerometer sensor module
Built-in RSSI PWM output(0-3.3V)
Built-in battery voltage detection
Smart Port enabled
SBUS Port enabled


Function:
The S8R supports stabilization, automatic level, hover and Knife-edge flight modes for conventional modes, stabilization and automatic level for Delta Wing (flying wing) and V-tail models. These model types can be enabled via the S8R.Config or S8R.lua. The S8R can be used as a standard 8 channel X series receiver if it is required.