Permagrit abrasives – Grimsby Model Centre

Permagrit Slotters

Wed, 20 May 2020 12:24:53 +0000

Spar Slotter, Coarse Grit, 6 mm (1/4″) or 3mm (1/8) Dims 150 x 12 x 6 mm. Grit equivalent UK 180 US 60 approx.
Spar Slotter, FINE Grit, 6 mm (1/4″) or 3mm (1/8). Dims 150 x 12 x 6 mm. Grit equivalent UK 320 US 120 approx.

Cut the perfect slots and grooves, or use as a safe edge tool.
Popular with scratch model builders.

GRITTED ON ONE FACE ONLY.

Permagrit Hand tools

Wed, 20 May 2020 12:15:34 +0000

Hand Tools COARSE, or Fine.
Examples includes:-
F102 Flat File,
R102 internal grit 13mm Radius File,
R200C external grit 13mm Radius File,
R201C 75 degree Angle File,
R202C 20mm Tube File,
R203C 14mm Tube File,
R204C Round 7mm File,
S204C Square 7mm File

A popular range Perma-Grit’s abrasive tools cut, sand and shape in any direction.
They outlast sandpaper thousands of times and can be used all all the materials, listed below and more.
If you are unable to cut or shape something, try Perma-Grit’s range of abrasives, you will be amazed.
Simple tools to use, tough and will give far better results.
“When the going gets tough, get Perma-Grit”

Perma-Grit® Tools will cut:- All Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Brass, Copper, Aluminium, Ceramics, Stone, Horn, Antler etc.

FINE grit is approx. equivalent to UK 320 / US 120 sandpaper.

COARSE grit is approx. equivalent to UK 180 / US 60 sandpaper.

Permagrit Needle and other Files

Wed, 20 May 2020 12:11:24 +0000

Files available in fine or Coarse and in standard or Needle files
Set of 5 or individually.
Styles.Hand (Flat), Half Round, Round, Triangle (3 Square) and Square
Overall length of each file 180 mm, shaft 5 mm approx. Gritted length 11.5 cm.(large)
Small Needle Files Fine Grit 140 mm overall length. Gritted length 7.5cm.
Use with or without a Handle,

Unlike conventional Needle Files, they cut in any direction
and will cut Plastics, Woods, Fibreglass, Ceramics, Stone,
Carbon fibre, PCB, Kevlar, Laminates, Polystyrene
etc. Complex sanding in confined places.
Fine grit equivalent to UK 320 grit sandpaper.

Permagrit Block

Wed, 20 May 2020 11:31:55 +0000

19 diferrent of Products Available:
Use to create straight edges, square off material and produce perfect dihedral angles.
Block sand large areas, profile wing leading and trailing edges, etc.
Made from anodized aluminium extrusion that is light and easy to handle and will not warp.
Tungsten carbide sheets are bonded to the extrusion with industrial grade double-sided tape.
The Flat blocks will sand a perfect 90 degree angle when placed on their edge.
The Wedge block allows you to sand into tight corners and the Contour block enables you to sand convex or concave areas.
Coarse on one side of the flat blocks and Fine on the other side.